Bloomfield Hills Garage Door Co
Our technician in a plain work shirt standing at an open garage door on a tree-lined residential street, inspecting the vertical track with a level, wide shot

Garage door repair · Rochester, MI

Garage Door Repair in Rochester, MI

We fix doors that will not open, will not close, sag on one side or rattle on the way down. Call with a description of the problem, and a technician comes to your driveway, checks the door, and tells you the repair and the price before touching a tool.

CALL NOW: (248) 975-7351
  • Licensed and insured
  • Upfront quote before work begins
  • Parts-and-labor warranty

Serving Rochester

Garage door repair in Rochester, MI and what usually goes wrong

Every garage door repair we do in Rochester begins with the same question: which part stopped doing its job? The door lifts on springs, rides on rollers inside two steel tracks, hangs from cables, and gets a push from an opener. Any one of those can fail while the others look fine, so a door that will not budge could have a snapped spring, a cable off its drum, a jammed roller or a dead opener motor, and each fix is different.

Rochester is a city in Oakland County, a northern suburb in Metro Detroit about 20 miles north of the city of Detroit. The doors we see in a place like that spend the winter through freezing nights and salted driveways, and the spring and weather seal take the brunt of it. Cold also stiffens old lubricant, which makes a door work harder every time it moves.

If the door slides smoothly by hand but ignores the remote, the trouble is probably electronic and not mechanical, and fixing the opener is a different job from anything on the door itself. Either way, tell us what you saw and heard when it stopped.

CALL NOW: (248) 975-7351
Our technician adjusting a steel roller in the side track of a sectional garage door, close view of hands and hardware, tidy garage interior

What we check

The parts we look at before we quote a fix

Lift springs

Torsion springs are rated for a set number of open-and-close cycles, and a door used several times a day wears through a standard spring in several years. A visible gap in the coil is the telltale.

Lift cables

Frayed strands or a loose loop at the bottom bracket mean a cable is near the end. A slack cable also lets one side of the door drop and bind.

Rollers and tracks

Rollers with worn stems or flat spots make noise and wear the track. A track bent by a bumper tap leaves the door tilting and catching.

Weather seal and bottom panel

A torn bottom seal lets in water, snow and cold. A damaged bottom panel often traces back to a door that came down unevenly.

Opener and sensors

Photo-eye sensors knocked out of line stop the door from closing. We check alignment, force settings and the auto-reverse as part of the visit.

CALL NOW: (248) 975-7351

How it works

What happens after you call

  1. 01

    Describe what you saw

    Did you hear a bang? Does the door move partway? Details help us bring the right parts.

  2. 02

    A technician comes to the house

    They look at the whole door, not only the part you suspect, and the uniformed technician explains the problem before starting.

  3. 03

    You hear the diagnosis and the quote

    The problem is explained in plain words, and the quote is given before any work begins.

  4. 04

    The repair and a test

    We replace or adjust what failed, balance the door, and test it from the wall button and the remote.

CALL NOW: (248) 975-7351

Door trouble

A door that sags, scrapes or stops partway is telling you which part is failing. Tell us what it does and we will work out the rest.

CALL NOW: (248) 975-7351

Our work

Finished doors and finished repairs

A carriage-style garage door in dark brown on a brick colonial house, cleanly aligned, evening light
A repaired door closing evenly
Close-up of a freshly installed bottom rubber seal along the base of a white garage door
New bottom seal
Interior view of a garage with a freshly installed pair of torsion springs and a centered bracket over a closed door
New springs on the shaft

FAQ

Rochester garage door repair, answered

Are garage doors expensive to fix?
Often only one or two parts have failed, which keeps a repair a smaller job than a new door. The price depends on the part, the door size and weight, and what the technician finds besides. You get the quote before work begins.
Are you supposed to get a garage door serviced?
Yes. A yearly look at springs, cables, rollers and the opener's safety reversal catches wear before something breaks. We can do that as a standalone visit.
What is the most common repair?
Broken torsion springs, followed by cables that have slipped off the drum and rollers that have worn out. Each shows up with a different sound or movement, which is why a description over the phone is useful.
Can I keep using the door in the meantime?
Not if a spring or cable has failed. The door may drop with no warning, and the opener is not designed to carry its full weight. Keep the door shut and leave the car where it is.
How long is the lifespan of a garage door?
A well-maintained steel door often lasts for decades, though springs and openers wear out well before the panels do. Replacing the door makes sense when panels crack or the door will not hold adjustment.
What should I have ready when I call?
Note the sounds, whether the door moves at all, and whether the opener runs. A photo of the spring area helps, but is not required.
Is your work backed up?
Our repairs and installations carry a parts-and-labor warranty, and we are locally owned and operated, licensed and insured. We also repair doors for homeowners in Troy.

Call us

Garage door stuck, loud or crooked?

Leave it as it is and call. We come to your Rochester home, find the failed part, and walk you through the repair before any work starts.

CALL NOW: (248) 975-7351
  • Licensed and insured
  • Upfront quote before work begins
  • Parts-and-labor warranty