Bloomfield Hills Garage Door Co
Our technician on a stepladder inspecting a ceiling-mounted garage door opener in a clean residential garage, daylight coming in from the open door

Opener repair · Bloomfield Hills, MI

Garage Door Opener Repair in Bloomfield Hills, MI

Opener humming without lifting, reversing on its own, or ignoring the remote? We come to your home in Bloomfield Hills, test the motor, sensors and controls to find the failed part, and explain the repair and the price before we start. Tell us what the opener is doing when you call.

CALL NOW: (248) 975-7351
  • Licensed and insured
  • Upfront quote before work begins
  • Parts-and-labor warranty

Opener repair

Garage door opener repair, from the remote to the motor

Garage door opener repair starts with working out whether the opener is the problem at all. A door with a snapped spring makes an opener hum, strain and stop, and it looks exactly like a dead motor. So we check the door's balance first. A properly balanced door should stay put when lifted halfway by hand with the opener disconnected. If it does not, the opener is working against a spring or cable problem and no opener part will fix it.

When the door is sound, we move to the opener. Common failures are a worn drive gear or sprocket, a stripped travel limit setting, a failed circuit board, a dead capacitor, a safety sensor that is out of line, and a remote or keypad that has lost its pairing. Cold Michigan mornings make a weak opener harder to start, because grease stiffens and the motor has to push a stiffer door.

We service LiftMaster and Genie openers, along with other common residential models, in chain, belt and screw drive types. Where a part is available and the unit is worth keeping, we repair it. Where the opener is old and the parts cost approaches a new unit, we say so and let you decide. If a replacement is the better choice, a new opener can be mounted on the same visit.

CALL NOW: (248) 975-7351
Our technician's hands opening the cover of a garage door opener motor unit to inspect the drive gear and circuit board, tools on the stepladder shelf

What we check

What we check first on an opener

Door balance and springs

We disconnect the opener and lift the door by hand. A door that is heavy or drops tells us the spring is the cause, and we say so before touching the opener.

Drive gear and trolley

Stripped plastic gears make a grinding or clicking noise while the motor runs and the door barely moves. We inspect the gear, chain or belt, and the trolley.

Travel and force limits

If the door stops short, reverses at the floor or will not close fully, the travel and force settings are often off and can be reset and tested.

Safety sensors and wiring

Misaligned eyes, loose wires and dirty lenses keep a door from closing. We trace the wiring and align the sensors.

Remotes, keypads and the wall control

A dead remote can be a battery, a lost pairing or a failed receiver. We test each one and reprogram what needs it.

The control board

Power surges and age can damage the board. When it has failed, we explain whether replacing it or the whole unit makes better sense.

CALL NOW: (248) 975-7351

How it works

How an opener repair goes

  1. 01

    You call and describe the symptoms

    Tell us what you hear and see: humming, clicking, a light that flashes, a door that reverses. That tells us where to look first.

  2. 02

    We come out and test

    The technician checks door balance, then the opener, sensors, wall control and remotes to find the actual fault.

  3. 03

    We explain the finding and the price

    You hear what failed and what the repair involves, with an upfront quote before any work begins.

  4. 04

    We repair it and test the safety reversal

    We replace the failed part, reset the limits, reprogram remotes and keypads, and confirm the door reverses when it meets an obstruction.

CALL NOW: (248) 975-7351

Opener trouble

An opener that groans, clicks or lets the door slam down is wearing out. Describe the sound and we will tell you what it likely needs.

CALL NOW: (248) 975-7351

Our work

Opener repair and finished results

A garage door opener mounted on its ceiling rail with the door halfway open in a tidy garage after our repair
An opener running smoothly after repair
Close-up of a wall-mounted garage door control and a keypad with plain unmarked buttons
Wall control and keypad
Close-up of a garage door safety sensor mounted near the floor on the track, its small indicator light on
A safety sensor aligned and working

FAQ

Opener repair questions

How do I know if it is the opener or the door?
Disconnect the opener with the release handle and lift the door by hand. If the door is heavy or drops, the spring or cable is the problem. If it moves easily and stays halfway up, the opener is the likely fault. We run this test at the start of every visit.
What does it cost to fix a garage door opener?
The price depends on the failed part, whether it is a gear, board, sensor or remote, and on the opener's age and model. We give you an upfront quote before any work begins, so you can compare repair against replacement.
Will a universal opener or remote work on any door?
A universal remote works only if it supports the rolling code or frequency of your opener. A universal opener works on most standard sectional doors, but the door must be in good balance. We check compatibility before programming anything.
Do you work on LiftMaster and Genie openers?
Yes. We service LiftMaster and Genie openers, remotes and keypads. Have the model number, usually printed on the motor unit, ready if you can reach it safely.
Is it safe to use the door while the opener is broken?
You can usually operate a balanced door by hand with the opener disconnected, but if you suspect a spring or cable problem, keep the door closed and do not lift it. Keep children and pets clear of the door.
Should I repair or replace an old opener?
Repair is reasonable when one part has failed and the rest is sound. Replacement is better when the opener lacks current safety features, parts are hard to get, or several parts are wearing at once. We lay out both options after testing.
Is the repair covered by a warranty?
Yes. Our repairs and installations are backed by a parts-and-labor warranty, and our technicians explain the problem before they start.

Call us

Opener humming but the door will not move?

Tell us what it is doing. We will come out to your home, find out whether it is the opener or the door, and explain the fix before any work starts.

CALL NOW: (248) 975-7351
  • Licensed and insured
  • Upfront quote before work begins
  • Parts-and-labor warranty